Roco Rescue

RescueTalk

WE DO RESCUE

Is Your Competent Person a “Trench” Competent Person?

Wednesday, May 02, 2018

OSHA’s Agency Priority Goal for 2018 aims to reduce trenching and excavation hazards. According to the Bureau of Labor Statistics, excavation and trench-related fatalities in 2016 were nearly double the average of the previous five years. OSHA’s goal is to increase awareness of trenching hazards in construction, educate employers and workers on safe cave-in prevention solutions, and decrease the number of trench collapses.

OSHA plans to issue public service announcements, support the National Utility Contractors Association’s 2018 Trench Safety Stand Down, update online resources on trench safety, and work with other industry associations and public utility companies to create an effective public-private effort to save lives. OSHA’s trenching and excavation national emphasis program is also currently under revision. For more information on trench safety, visit OSHA’s safety health topics page.

Comments by Dennis O'Connell, Roco Director of Training & Chief Instructor

Over the past few years, Roco has made trench safety a priority goal by dedicating more than 15 articles on this website as well as a podcast to trench-related subjects in an attempt to increase awareness for trench safety and rescue just as OSHA is for 2018.

One area we have identified where facilities may be in violation is having personnel who are not “trench” competent persons sign off on trenches. Many times, the company representative is a “Confined Space Competent Person” or “Entry Supervisor,” and we are asking them to sign off that a trench shoring system is adequate when they have little or no training.

Just because you are competent person in one area does not mean you are a competent person in all of them. A confined space knowledge base is not the same as a trench knowledge base.

The OSHA Construction Standard Defines a Competent Person “as someone who is capable of identifying existing and predictable hazards in the surroundings, or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them.”

Key Points:
Can your competent person...

  • ·  Classify the soil type?
  • ·  Determine the appropriate protective system based on depth, width, and soil conditions?
  • ·  Assure that proper protective measures are in place?
  • ·  Perform atmospheric monitoring?
  • ·  Ensure the work site is safe for surcharge loads?
  • ·  Identify who is going to respond with trench rescue capabilities in an emergency?
    If you are unsure regarding any of these basic questions, you may need to look at the training your competent person and rescue team are getting. 
    For more information, visit our Roco Trench Rescue page to view the course description and 2018 training dates. Register today to learn more about trench safety and rescue operations.

Resource: OSHA Quick Takes
Photo credit: Underground Safety Equipment/NAXSA

read more 

Job Assignments and Rescue Duties

Wednesday, May 02, 2018

QUESTION: Should industrial rescue team members be informed of any scheduled confined space entries at the beginning of their shift?

ANSWER: While OSHA does not mandate that individual team members be notified; common sense and best practices do. Here’s our reasoning for encouraging this “information sharing” at the beginning of each shift.

First of all, it is the Entry Supervisor’s responsibility to ensure that the rescue service is available prior to each PRCS entry. This verification should be performed in a way that confirmation of availability can be documented. There are various reasons that the in-house team may not be immediately available, so it’s up to the Entry Supervisor to plan ahead and coordinate with the team. Most often in-house industrial rescue team members have regular job assignments in addition to their rescue duties. Depending on the particular assignment, he or she may or may not be available to respond to a rescue emergency. In fact, we have heard of incidents where the Entry Supervisor just “assumed” that because the facility had an in-house rescue team that the team would always be ready to respond. In one instance when an in-house team was notified of a PRCS emergency, only one (1) team member was on shift and available to respond. Apparently, other team members were on sick leave, vacation, or at shift change. As you can see, two-way communication between the Entry Supervisor and the rescue service is a must!

Having a system in place that allows on-duty team members to be aware of PRCS entries that are scheduled during a given shift allows them to start the preplan process, which will help reduce response and preparation times. It also provides Team Leaders (IC) with a better understanding of possible rescue needs and how best to utilize available resources if an emergency situation should arise. And, these are just some of the reasons we recommend that on-duty team members be accounted for and be made aware of any entries occurring during their shift - including the location, the type of entry and the hazards involved. It simply provides for better preparation; thus, making everyone safer.

read more 

Why is LOTO So Important?

Tuesday, April 03, 2018

Foundry Fined for Confined Space Amputation Accident

Los Angeles - Cal/OSHA has cited a local foundry $283,390 for workplace safety and health violations following a confined space accident that resulted in the amputation of an employee’s legs. Cal/OSHA had cited the foundry for similar violations eight years ago.

Two workers were cleaning and unjamming a 38-foot long auger screw conveyor at the bottom hopper of an industrial air filtration device without effectively de-energizing or locking out the equipment.

One of the workers re-entered the 20-inch square opening after the cleaning was done to retrieve a work light from inside the confined space, when a maintenance worker 45 feet away energized the equipment to perform a test.

The moving auger screw pulled the worker into the screw conveyor. Both his legs had to be amputated in order to free him.

“Sending a worker into a confined space is dangerous, especially inside machinery that can be powered on at any time,” said Cal/OSHA Chief Juliann Sum.
Employers must ensure that machinery and equipment are de-energized and locked out before workers enter the space to perform operations involving cleaning and servicing.

Cal/OSHA’s investigation found that:

• The foundry did not have a permit-required confined space program.
• The screw conveyor was not de-energized and locked out before workers entered the hopper, and accident prevention signs were not placed on the controls.
• The worker re-entering the hopper was not monitored by a confined space attendant.
• The foundry lacked specific procedures for de-energizing and locking out the equipment.

Cal/OSHA issued eight citations with proposed penalties totaling $283,390. The eight violations cited included one willful serious accident-related, one willful serious, four serious, one willful general and one general in nature.

Source: www.dir.ca.gov News Release No.: 2018-15 Date: March 7, 2018
read more 

Roco Training Coming to Lake Charles Area

Monday, February 19, 2018

Roco Industrial Rescue I/II
CERTC Facility in Sulphur, Louisiana
September 24-28, 2018

Designed for those who may respond to industrial emergencies, this 50-hour course will prepare responders for confined space and high angle rescue.

Roco’s Industrial Rescue I/II™ takes a very hands-on approach that provides the skills necessary to meet OSHA guidelines for a competent rescuer. Participants will practice rescue from all six (6) confined space types based on OSHA-defined criteria. These realistic scenarios can be used to document practice requirements as required by OSHA 1910.146. Simulated IDLH atmospheres requiring the use of Supplied Air Respirators (SAR / SCBA) will also be included.

Starting with the basics, students will be taught safe, simple and proven techniques that will allow them to effectively perform confined space rescue from elevated vessels and towers. These skills can also be used for offshore platform environments and fall protection rescue. Classroom lecture will cover applicable OSHA, ANSI and NFPA standards as well as Authorized Entrant, Attendant and Supervisor training.

Click to register for the Sulphur training location today!

read more 

New Pocket Guide from Roco

Monday, February 12, 2018

Newly revised and updated with 82-pages of color drawings and detailed illustrations, Roco's new Pocket Guide features techniques taught in our rescue classes. Made from synthetic paper that is impervious to moisture makes this pocket-sized guide the perfect reference during training or on the scene.

Pocket Guide features: Knots - Rigging - Patient Packaging - Lower/Hauling Systems - Tripod Operations - Low Angle - Pick-off Rescue - High-lines - Confined Spaces and much more.

Reference charts include: Confined Space Types, Suspension Trauma, and Rescue Gear Service Life Chart.

SPECIAL PRICING OF $29.95 THROUGH APRIL 1, 2018 - No Foolin'!

Click here to order your copy today!!

read more 

Next
1 2 3 4 5 .. 17

RescueTalk (RocoRescue.com) has been created as a free resource for sharing insightful information, news, views and commentary for our students and others who are interested in technical rope rescue. Therefore, we make no representations as to accuracy, completeness, or suitability of any information and are not liable for any errors, omissions, or delays in this information or any losses, injuries, or damages arising from its display or use. All information is provided on an as-is basis. Users and readers are 100% responsible for their own actions in every situation. Information presented on this website in no way replaces proper training!