We're often asked about using training rope for rescue purposes, so here's what we discovered...
The short answer is yes. However, NFPA 1500 provides some additional guidelines.
NFPA 1500 Standard on Fire Department Occupational Safety and Health Program (2007 Edition)
7.16.3* Life safety rope used for rescue at fires or other emergency incidents or for training shall be permitted to be reused if inspected before and after each such use in accordance with the manufacturers’ instructions and provided that the following criteria are met:
(1) The rope has not been visually damaged by exposure to heat, direct flame impingement, chemical exposure or abrasion.
(3) The rope has not been exposed to chemical liquids, solids, gases, mists or vapors of any material known to deteriorate rope.
220.127.116.11 If the rope used for rescue at fires or other emergency incidents or for training does not meet the criteria set forth in 7.16.3(1), 7.16.3(2), or 7.16.3(3) or fails the visual inspection, it shall be destroyed.
18.104.22.168 If there is any question regarding the serviceability of the rope after consideration of the criteria listed in 7.16.3, the rope shall be taken out of service.
(*) Asterisk indicates that explanatory material is included in Annex A. While Annex A is not a part of the requirements of the NFPA document, it is included for informational purposes only.
Annex A (NFPA 1500)
A.7.16.3 Life safety rope can be significantly weakened by abrasion, misuse, contamination, wear, and stresses approaching its breaking strength, particularly impact loading. Because there is no approved method to service test a rope without compromising its strength, rope rescue and training operations should be carefully observed and monitored for conditions that could cause immediate failure or result in undetectable damage to the rope. If a rope has been used in a situation that could not be supervised or where potential damage could have occurred, it should be removed from service and destroyed.
It is important that ropes be inspected for signs of wear by qualified individuals after each use. If indications of wear or damage are noted, or if the rope has been stressed in excess of the manufacturers’ recommendations or has been impact loaded, it should be destroyed. The destruction of the rope means that it should be removed from service and altered in such a manner that it could not be mistakenly used as a life safety rope. This alteration could include disposal or removal of identifying labels and attachments and cutting the rope into short lengths that could be used for utility purposes.
The assignment of disposable life safety ropes to members or to vehicles has proven to be an effective system to manage ropes that are provided for emergency use and are used infrequently.
Special rescue teams, which train frequently and use large quantities of rope, should include members who are qualified to manage and evaluate the condition of their ropes and determine the limitations upon their reuse.